|
| |
TM 5-4210-233-14&P-1
5-42. REAR TANDEM AXLE AND DIFFERENTIAL-Continued
(13)
Connect end of torque rod (103 to brackets on top of axle with two screws (g), washers (8) and
nuts (7). Torque nuts (17) to 300 to 325 lb ft (406 to 440 Nm).
(14)
Connect end of torque rod (10) to bracket on top of axle (5) with two screws (9), washers (8)
and nuts (7). Torque nuts to 300 to 325 lb ft (406 to 440 Nm). Connect center of torque rod (10) to
frame with screws (14), washers (13) and nuts (12). Torque nuts (12) to 300 to 325 lb ft (406 to 440
Nm).
(15)
Fill axle with gear oil (see pare 4-166).
f.
Follow-on Maintenance.
(1) Refer to para 5-7 and connect interaxle drive shaft (1) to rear tandem axle differential.
(2) Install brake chambers (see para 5-34) and slack adjusters (see para 4-143) on axle.
(3) Install brake shoes and drums (see para 5-36 and 5-37).
(4) Refer to para 4-143 and install wheels and tires on axle.
(5) Raise truck and remove blocking from beneath truck.
(6) Remove jack from beneath truck and remove chocks from beneath front wheels.
(7) Connect batteries (see para 4-114).
5-285
|
