|
| |
TM 5-4210-233-14&P-1
5-42. REAR TANDEM AXLE AND DIFFERENTIAL-Continued
(19)
Install bearing cones (19) on case halves (9). Use a press and a sleeve to install bearing cones
(19).
(20)
Press bearing cones (19) completely onto case half to bring bearing cones (19) flush with face of
case half (9). Place the flange case half on a bench, ring gear teeth (18) toward the top.
(21)
Apply axle lubricant to the inside surfaces of both case halves (9), spider (14), hrust washers (10
and 11), side green (13) and differential pinions (12).
(22)
Install one thrust washer (10) and side gear (13) into flange case half (9). Install the spider (14),
differential pinion (12) and thrust washers (11) in the flange case half (19).
5-271
|
