|
| |
TM 5-4210-233-14&P-1
5-42. REAR TANDUM AXLE AND DIFFERENTIAL - Continued
(21) Place case half (9) and ring gear (18) on
wooden blocks in a press. Press case half
(19) through ring gear (18).
(22) Use a bearing puller or a press and remove
bearing cones (19) from case halves.
(23) Fasten a yoke or flange bar to the input yoke
(20) to hold pinion in position when nut (3) is
removed. Remove nut (21) and disengage
flange bar from yoke.
(24) Use a yoke or flange puller and remove yoke
(20) from pinion. Remove deflector (22).
5-261
|
