|
| |
TM 5-4210-233-14&P-1
5-42. REAR TANDUM AXLE AND DIFFERENTIAL
This task covers:
a.
Removal
d.
Assembly
b.
Disassembly
e.
Installation
c.
Cleaning and Inspection f.
Follow-on Maintenance
TOOLS REQUIRED:
PERSONNEL REQUIRED - 2
Tool Kit, General Mechanics, Automotive
(Appendix B, Section 111, Item 1)
EQUIPMENTCONDITION
Tool Kit (Item 4)
Main Engine Shutdown (see para 2-12.)
Carrier Stand (Item 85, Appendix B, Section 111)
Batteries Disconnected (see para 4-114.)
Rear Tandem Axle and Differential
MATERIALS/PARTS REQUIRED
Brake Chambers Removed (see para 5-34.)
Engine Oil (OE) (Item 20, Appendix E)
Rear Tandem Axle and Differential
Dry Cleaning Solvent (Item 3, Appendix E)
Slack Adjusters Removed (see para 4-146.)
Silicone Gasket Material (Item 35, Appendix E)
Rear Tandem Axle and Differential
Oil, Gear (Item 45, Appendix E)
Brake Shoes and Drums Removed (see para
Cord (Item 55, Appendix E)
5-36 and 5-37.)
Tags, Identification (Item 32, Appendix E)
Tires and Wheels Removed (see para 4-143.)
Compound, Retaining - Loctite (Item 7, Appendix E)
Marking Compound (Item 56, Appendix E)
Oil Seals (Figure 165, Appendix F)
Bearing Cones (Figure 165, Appendix F)
Bearing Caps (Figure 165, Appendix F)
a.
Removal.
(1)
Place chocks under front wheels. Use a suitable jack or hoisting equipment to raise truck high enough
to remove axle.
(2)
Place sufficient blocking under truck frame to safely support truck during axle removal.
(3) Refer to para 5-7 and disconnect inter-axle drive shaft (1) from rear tandem axle differential (5A).
5-255
|
