|
| |
TM 5-4210-233-14&P-1
5-40. FRONT STEERING AXLE
(2) Remove cotter pin (3A) and nut (3B) and remove steering arm (6). Remove key (7).
(3) Remove cotter pin (4) and nut (5) and disengage tube arm (2) from knuckles (8). Remove key (40)
from tube arm.
(4) Remove plugs (11 A) and drain oil from hub caps (11).
(5) Remove twelve screws (9) and washers (10), remove two hub caps (11) and gaskets (12). Remove
cotter pins (13) and remove nuts (14) and washers (15) from hub (16). Discard gaskets.
(6) Remove hubs (16) from knuckles (8).
(7) Remove and discard oil seals (17) from hubs. Remove bearing cones (18 and 19) from hubs.
(8) If cups (20 and 21) are damaged, remove cups by pulling from hubs.
(9) Remove stop screws (22) and nuts (23) from steering knuckle (8).
5-237
|
