|
| |
TM 5-4210-233-14&P-1
5-34. REAR BRAKE AIR CHAMBER - Continued
b.
Installation.
(1) Attach brake air chamber (6) to brake air
chamber bracket (7) using washers (5)
and nuts (4). Be sure hose ports in
brake air chamber face away from
bracket. Tighten nuts (4) to 170 ft lb (230
N•m).
(2) Apply a light coat of pipe sealant (Item 2,
Appendix E) to thread of fittings and
install brake air chamber air lines (3) to
brake air chamber. Tighten fittings
firmly to provide leak-proof connections.
(3) Attach slack adjuster (8) to brake air
chamber clevis using clevis pin (2) and
cotter pin (1).
(4) Adjust clevis position and push rod so
that distance F from bottom of brake air
chamber to center of clevis pin holes
equals 2-5/8 ± 1/16 in. (66.7+ 1.59 mm)
(see para 4-146).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
5-200
|
