|
| |
TM 5-4210-233-14&P-1
5-33. HUBS, BEARINGS, AND SEALS - Continued
c.
Installation.
(1)
Press in outer (1 4) and inner (1 3) bearing cups.
(2)
Install inner bearing (1 2) and new bearing seal (11).
(3)
Install hub (10) on spindle.
(4)
Install outer bearing (9).
(5)
Install D-washer (8) and adjusting nut (7).
(6)
Torque adjusting nut (7) to 100 Ibt t (136 N.m) while rotating hub (10) in both directions. Loosen
adjusting nut (7) completely and then torque adjusting nut (7) to 20 lb tt (27 N-m) while rotating
hub (1 0).
(7)
Install cotter pin (6).
(8)
Install hub cap gasket (5) and hub cap (2) and secure with six washers (4) and capscrews (3).
(9)
Fill hub assembly (2) with gear oil (Item 19, Appendix E). Install plug (1).
d.
Follow-on Maintenance.
(1)
Install brake shoes (see para 5-36).
(2)
Install wheels (see para 4-143).
(3)
Connect batteries (see para 4-114).
'
6-198
|
