|
| |
TM 5-4210-233-14&P-1
4-201. AERIAL LADDER WATER PIPE ASSEMBLY - Continued
(3)
Remove four nuts (3), lockwashers (4) and bolts (5).
(4)
Remove O-ring (6) from end of pipe (2).
(5)
Remove eight bolts (7), eight washers, and
eight locknuts (8).
(6)
Remove pipe (2) from pipe (1).
(7)
Remove nut (12) and Bronze wear pad (13).
(8)
Remove Ryertex wear pad (9) from pipe (2). Remove O-ring (10).
(9)
Remove cup seal (11) from Ryertex wear pad (9).
(10)
Repeat procedure for each section of pipe tobe removed.
4-506
|
