|
| |
TM 5-4210-233-14&P-1
4-182. WATER PRESSURE GAUGE (0-600 PSI)
THIS TASK COVERS:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12.)
(Appendix B, Section III, Item 1)
APU Shutdown 2-16.)
Batteries Disconnected (see para 4-1 14.)
a.
Removal.
(1) Without disconnecting hydraulic hoses,
remove ladder control valve (see para 5-56)
for access to water pressure gauge.
(2) Remove hose (1) and fitting (2).
(3) Remove two hex nuts (3), two star washers
(4) and two clamps (5).
(4) Remove gauge (6).
b.
Installation.
(1) Install gauge (6).
(2) Install two clamps (5), two star washers (4),
and two hex nuts (3).
(3) Install hose (1) and fitting (2).
(4) Install ladder control valve (see para 5-56).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
(2) Operate aerial discharge (see para 2-13) an
test operation of WATER PRESSURE
GAUGE.
4-472
|
