|
| |
TM 5-4210233-14&P-1
4-162. POWER STEERING RESERVOIR - Continued
b.
Installation.
(1) Install new O-ring (13) onfitting (12).
(2) Apply pipe sealant (Item 2, Appendix E) to fitting (11) threads and install fitting in reservoir (10).
(3) Position reservoir (10) and two brackets (7) as shown.
(4) Install brackets (7) on reservoir (10). Secure with two screws (8) and nuts (9).
(5) Install reservoir (10) and brackets (7). Secure with four bolts (3), four flatwashers (4), four lockwashers
(5) and four nuts (6).
(6) Install hoses (1 and 2).
(7) Add fluid (Item 21, Appendix E) to reservoir (see para 3-8.).
c.
Follow-on Maintenance.
(1) Connect Batteries (see para 4-114).
(2) Start engine and check hose connections for leaks. Tighten fittings as necessary.
(3) Turn steering wheel fully right and fully left to bleed air from steering system. After a couple of turns
the steering motion should become smooth.
(4) Stop the engine and check the reservoir dipstick. Top off the reservoir as required.
4-441
|
