|
| |
TM 5-4210-233-14&P-1
4-161. POWER STEERING GEAR - Continued
(4) Remove pitman arm nut (5) and bolt (6).
(5) Make timing marks on pitman arm (7) and sector shaft (8).
NOTE
A chisel will help you loosen the pitman arm. Use only a puller if you cannot
remove the pitman arm with your hands.
(6) Remove pitman arm (7).
(7) Loosen nut (9) on bolt (9A) and disconnect steering shaft (10) from steering gear (11).
(8) Remove six bolts (12) and six washers (13) securing steering gear to frame and remove
steering gear (11).
b. Installation.
(1) Secure steering gear (l1) to frame with six washers (13) and six bolts (12).
(2) Connect steering shaft (10) to steering gear (11) and tighten nut (9) to 35 ft lb (48 N•m).
(3) Install pitman arm (7) on sector shaft (8) making sure timing marks are aligned.
(4) Install bolt (6) and pitman arm nut (5).
(5) Torque bolt (6) to 300-320 ft. Ibs. (407-434 N•m).
(6) Connect hoses (1 and 2) to proper fittings (3 and 4) on steering gear (11).
c. Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
(2) Bleed air from steering system (see para 4-162).
4-439
|
