|
| |
TM 5-4210-233-14&P-1
4-160. STEERING SHAFT
THIS TASK COVERS:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
MATERIALS REQUIRED
Antiseize Compound (Item 4, Appendix E)
a.
Removal.
(1) Loosen two nuts (1) on bolts (1A) in steering
shaft U-joints (2).
(2) Slide steering shaft (3) toward steering gear
(4) until disengaged from miter box shaft (5).
(3) Pull steering shaft (3) from steering gear shaft (6).
b.
Installation.
(1) Coat miter box shaft (5) and steering gear
shaft (6) with antiseize compound (Item 4,
Appendix E).
(2) Slide steering shaft (3) onto steering gear
shaft (6). Tighten nut (1) on U-joint (2) at
steering gear to a torque of 35 ft lb (48 N.m).
(3) Slide steering shaft U joint (2) onto miter box shaft (5).
(4) Torque nut (1) to 35 ft lb (48 N.m).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
4-437
|
