|
| |
TM 5-4210-233-14&P-1
4-114. BATTERIES - Continued
(4) Loosen nut (4) and remove positive (4) cable (5) from battery terminal (6).
(5) Remove nuts (7) and washers (8) securing holddown bar (9) on holddown rods (9A) and remove
holddown bar.
(6) Using two people, grasp handles (10) on each side of battery (11). Lift battery (12) straight up and out
of battery box (13) and truck.
c.
Installation.
(1) Using two people, install new battery in battery box. Do not trap battery leads.
(2) Install holddown bar (9) on holddown rods (9A). Fasten bar with nuts (7) and washers (8).
(3) Install red positive (+) cable (5) to POS (+) terminal (6) and tighten nut (4).
(4) Install black negative (-) cable (2) to NEG (-) terminal (3) and tighten nut (1).
(5) Tighten terminal post nuts (1 and 4) to 30 ft lb (41 N·m).
(6) Close and latch battery box cover.
4-367
|
