|
| |
TM 5-4210-233-14&P-1
4-113. BATTERY ISOLATOR - Continued
(3)
Tag two green-labeled leads (6 and 7). Remove nut (8) and disconnect leads (6 and 7) from terminal 2
of isolator(15).
(4)
Tag one red-labeled lead (9). Remove nut (10) and disconnect lead (9) from terminal A of isolator (15).
(5)
Tag two yellow-labeled leads (11 and 12). Remove nut (13) and disconnect leads (11 and 12) from
terminal 1 of isolator.
(6)
Remove eight screws (14) and remove isolator (15).
b.
Installation
(1) Position isolator (15) and secure with eight screws (14).
(2) Secure two yellow-labeled leads (11 and 12) to terminal 1 of isolator (15) with nut (13).
(3) Secure one red-labeled lead (9) to terminal A of isolator (15) with nut (10).
(4) Secure two green-labeled leads (6 and 7) to terminal 2 of isolator (15) with nut (8).
(5) Install plate (5) and secure with twelve screws (4).
(6) Install storage box (3) and secure with eight screws (1) and washers (2).
(7) Replace seat cushion (3A).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114.).
4-363
|
