|
| |
TM 5-4210-233-14&P-1
4-102. HEATER CONTROL HEAD ASSEMBLY-Continued
(3) Tag and disconnect electrical leads from heater control.
(4) Tag two cables on heater control (9).
(5) Loosen nuts (1 0) and remove cables (11)from heater control.
b.
Installation.
(1) Install cables (11) through slots in heater control and secure cables with nuts (10).
(2) Connect electrical leads to heater control. Remove wire tags.
(3) Secure heater control (9) to panel (3) with two screws (4) and two screws (5), two flat washers (6),
two lockwashers (7), and two hex nuts (8).
(4) Tilt plate (3) upwards and secure to dashboard with two screws (1) and washers (2).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
4-348
|
