|
| |
TM 5-4210-233-14&P-1
4-100. TRANSMISSION SHIFT CONTROL
This task covers:
a.
Removal, Transmission Shift Control
b.
Removal, transmission Control Cable
c.
Cleaning and Inspection
d.
Installation, Transmission Control Cable
e.
Installation, Transmission Shift Control
f.
Follow-on Maintenance
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
MATERIALS/PARTS REQUIRED
Emery Cloth (Item 25, Appendix E)
Tie Straps (Item 33, Appendix E)
a.
Removal, Transmission Shift Control.
(1) Remove four screws (1) and remove
cover (2) and rubber gasket (3).
(2) Remove four screws (4) and four flat
washers (5) from plate (6).
(3) Remove four screws (7) and
washers (8) from plate (9).
(4) Remove four screws (10), and
washers (11). Remove plate (9)
from plate (6).
(5) Pull transmission shift control up to
access transmission cable (12).
(6) Mark location of end fitting (14) on
transmission shift control.
(7) Remove spring clip (13) and end
fitting (14).
(8) Remove two nuts (15), lockwasher (16)
and screws (17) and clamp (18).
(9) Remove cable (12) from transmission
shift control (19).
(10) Remove transmission shift control (19)
from truck.
4-343
|
