|
| |
TM 5-4210-233-14&P-1
4-93. CAB INSTRUMENT PANEL GAUGES
This task covers:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12.)
(Appendix b, Section III, Item 1)
APU Shutdown (see para 2-16.)
Batteries Disconnected (see para 4-114.)
a.
Removal.
(1) Remove three screws (3) and tilt dash panel (4) forward to access wiring.
(2) Remove two screws (1) and bezel (2) from gauge.
(3) Tag and disconnect wiring from back of gauge.
(4) Remove nuts (5) from bracket (6).
(5) Remove gauge (7).
b.
Installation.
(1) Install gauge (7), bracket (6) and nuts (5).
(2) Secure wiring to gauge.
(3) Close dash panel (4) and secure with three screws
(3).
(4) Install bezel (2) on gauge with two screws (1).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
(2) Start engine and check operation of gauge.
4-333
|
