|
| |
TM 5-4210-233-14&P-1
4-90. LADDER LOCK LIGHT-Continued
NOTE
Nuts (6) are used as spacers only. Screws (4) should not thread
into nuts, but must slide through without interference.
Coat screws (4) with Loctite (Item 7, Appendix E).
(2) Put nuts (6) in position over holes in ladder support. Put reflector in position and install four screws
(4).
(3) Install bulb (3).
(4) Install lens (2) with four screws (1).
d.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
4-330
|
