|
| |
TM 5-4210-233-14&P-1
4-82. DIRECTIONAL MARKER LIGHTS-Continued
c.
Assembly.
(1) Install gasket (8) over wires and connect wiring to truck with butt splice connector (Item 27,
Appendix E). Remove wire tags.
(2) Install reflector (7) with two screws (6).
(3) Install bulb (5).
NOTE
When assembling light make sure drain hole in lens is facing
down.
(4) Install gasket (4), lens (3) and retaining ring (2).
(5) Install two screws (1).
d.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
(2) Test operation of lights.
4-316
|
