|
| |
TM 5-4210-233-14&P-1
4-81. HEADLIGHTS
This task covers:
a. Removal
c. Follow-on Maintenance
b.
Installation
TOOLS REOUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section IlI, Item 1) APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
a.
Removal.
(1) Remove six screws (1).
(2) Remove cover (2).
(3) Remove four screws (3) and retainer (4).
(4) Remove head lamp (5).
(5) Disconnect wiring harness from headlamp.
b.
Installation.
(1) Connect wiring harness to back of
headlamp (5
(2) Install headlamp (5).
(3) Install retainer (4) and four screws (3).
(4) Install cover (2) and six screws (1).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
(2) Test operation of headlights.
(3) Adjust headlights (see para d. below).
d.
Adjustment.
(1) Locate vehicle on level surface with lamps
25 ft. (7.6 m) from garage door or
headlamp adjusting screen.
(
(2) Align centerline of vehicle with centerline of
screen (1).
(3) Locate a horizontal line on screen at height
of
lamp centers (2).
(4) Light head lamps and adjust lamp by
turning adjusting screws until the height
intensity zone is located on adjusting
screen as indicated (3).
4-314
|
