|
| |
TM 5-4210-233-14&P-1
4-79. WINDSHIELD
This task covers:
a. Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section III, Item 1)APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
Window Installation Tool
Windshield Wiper Arms Removed
(Appendix B, Section III, Item 17)
(see para 4-112 .)
MATERIALS/PARTS REQUIRED
Sealant (Item 35, Appendix E)
a.
Removal.
(1) Remove chrome locking strips (1) from
center of rubber gasket (2).
(2) Remove glass (3) from gasket (2).
(3) Remove gasket (2) from window frame.
b.
Installation.
(1) Clean surfaces of window frame and
edge of new glass.
(2) Apply sealant (Item 35, Appendix E) to
inner and outer groove of gasket (2).
(3) Install gasket (2) in frame of window.
(4) Install glass (3) in gasket (2).
(5) Install locking strip (1) in gasket (2) with
window installing tool (Appendix B,
Section III, Item 17).
(6) Remove any excess sealant on glass or
window frame.
c.
Follow-on Maintenance.
(1) Install windshield wiper arms
(see para 4-112).
(2) Connect batteries (see para 4-114).
4-311
|
