|
| |
TM 5-4210-233-14&P-1
4-77. CAB DOORS-Continued
(6)
Install two screws (32), lockwashers (33) and nuts (34) to secure window crank assembly (28) to
bracket (28A).
(7)
Install bolt (30) and nut (29) to secure arm of window regulator (28) to horizontal slide track (31).
(8)
To install inside door handle (14) on door panel (11), attach spring (19) to handle with bolt (18) and
nut (17).
(9)
Attach handle (14) to door panel (11) with two screws (15) and nuts (16).
(10)
To install door panel (11) to door, attach cable (13) to inside door handle (14) and fasten with nut
(12).
Remove three screws (35), nuts (36) and washers (37) securing regulator mounting bracket to edge
of door.
(11)
Align door panel (1 6) on door and fasten with nine screws (9) and washers (10).
(12)
Install grab handles (20 and 24) and spacers (20A and 24A) with screws (21 and 25), washers (22
and 26) and nuts (23 and 27).
(13)
Install ring (6) and window handle (8) on stud of crank assembly.
(14)
Press inner ring (6) on window crank (8) toward door and install pin (7) into handle to fasten to
assembly.
e.
Installation.
(1)
Align door (3) on truck and support.
(2)
Secure door hinge (5) to truck with eight screws (4) and internal tooth lockwashers (4A).
(3)
Attach strap (2) to door (3) with three screws (1).
4-309
|
