|
| |
TM 5-4210-233-14&P-1
4-77. CAB DOORS
This task covers:
a.
Removal
d.
Follow-on Maintenance
b.
Disassembly
e.
Installation
c.
Cleaning and Inspection
TOOLS REQUIRED:
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section III, Item 1)APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
MATERIALS/PARTS REQUIRED
Silicone Grease (Item 11, Appendix E)
a.
Removal.
(1) Remove three screws (1) attaching strap (2) to door (3).
(2) Support door (3).
(3) Remove eight screws (4) and internal tooth lockwashers (4A) attaching hinge (5) to truck.
(4) Remove door from truck.
b.
Disassembly.
NOTE
Grip handles (20 and 24) should remain in place when
removing panel (11).
(1) Press inner ring (6) on window crank toward door and drive pin (7) from handle (8).
(2) Remove handle (8).
(3) Remove nine screws (9) and washers (10) from door panel (11).
(4) Remove nut (12) and release cable (13).
(5) Remove door panel (11).
(6) To remove inside door release handle (14), remove two screws (15) and nuts (16).
(7) Remove nut (17), bolt (18), and spring (19) from door handle (14).
(8) Remove inside grab handle (20) and spacers (20A) by removing screws (21), washers (22) and
nuts (23).
(9) Remove grab handle (24) and spacers (24A) by removing screws (25), washers (26) and nuts (27).
4-306
|
