|
| |
TM 5-4210-233-14&P-1
4-73. REAR ROLL-UP DOOR
This task covers:
a. Removal
c.
Latch Replacement
b.
Installation
d.
Follow-on Maintenance
TOOLS RECOVERED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section IlI, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
MATERIALS/PARTS REQUIRED
Stop, Turn and Tail Signal Light Removed
Tag (Figure 42, Appendix F)
(see para 4-65 .)
Warning Buzzer Pushbutton Removed
(see para 4-68 .)
Rear Strobe Light Removed (see para 4-61 .)
Rear Step Lights Removed (see para 4-14 .)
a.
Removal.
(1)
Remove eleven screws (1) securing
right-hand panel (2) to frame.
(2)
Remove tag (3) from warning buzzer
bezel (4).
(3)
Remove two screws (5) from bezel
(4), and remove bezel from panel (2).
(4)
Remove fifteen screws (6) securing
panel (7) to frame and remove panel
(7).
(5)
Remove
screws
(8)
securing
passenger side track (9) to frame.
(6)
Slide door (10) from driver's side
door track (11).
b.
Installation.
(1)
Install new door (10) in driver's side
door track (11).
(2)
Install passenger side door track (9)
over door (10).
(3)
Secure door track (9) with screws (8).
(4)
Install panel (7) and fasten in place
with fifteen screws (6).
(5)
Install bezel (4) and secure with two
screws (5).
(6)
Install new tag (3) to bezel (4).
4-301
|
