|
| |
TM 5-4210-233-14&P-1
4-68. WARNING BUZZER PUSH BUTTONS
This task covers:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section IlI, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
Stop, Turn and Tail Lights removed
(see para 4-65 .)
a.
Removal.
(1) Unscrew switch cap (1).
(2) Remove switch (2) through tail light
opening.
(3) Remove two screws (3) and wires (4).
b.
Installation.
(1) Install wires (4) with two screws (3).
(2) Adjust nut (5) so that it is in the middle of
the threaded area of the switch.
(3) Install switch (2) and thread on switch cap
(1).
c.
Follow-on Maintenance.
(1) Install stop, turn & tail lights (see para 4-
65 .).
(2) Connect batteries (see para 4-114).
(3) Turn battery switch on and test both
warning buzzer push buttons. Buzzer
should be heard in cab when pressed.
4-291
|
