|
| |
TM 5-4210-233-14&P-1
4-66. REAR SCENE LIGHT
This task covers:
a.
Removal
d.
Follow-on Maintenance
b.
Cleaning and Inspection
c.
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section IlI, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
MATERIALS/PARTS REQUIRED
Emery Cloth (Item 25, Appendix E)
Butt Splice (Item 27, Appendix E)
a.
Removal.
(1) Remove four screws (1), lens (2) and
gasket (3).
(2) Remove bulb (4).
(3) Remove four screws (5) from reflector (6).
(4) Remove wiring harness by cutting butt
splice.
(5) Remove reflector (6).
b. Cleaning and Inspection.
(1) Clean lens (1) and reflector (6).
(2) Inspect lens for cracks. If cracked, replace
lens.
(3) Inspect for broken or cracked reflector. If
reflector is damaged, replace reflector.
(4) Inspect wiring for fraying or cracked
insulation. If wiring is damaged, contact
Direct Support Maintenance.
(5) Inspect bulb socket, bulb contacts, and
wiring for corrosion. Clean corrosion with
emery cloth (Item 25, Appendix E). If
corrosion cannot be removed, replace
reflector.
4-288
|
