|
| |
TM 5-4210-233-14&P-1
4-64. BACK-UP LIGHTS-Continued
c.
Assembly.
(1)
Thread wires through hole in gasket (8).
(2)
Attach wiring harness to wire of new lamp assembly (7) using new butt connector (item 27,
Appendix E).
(3)
Install reflector assembly (7) with two screws (6).
(4)
Install gasket (4) and lens (3). Fasten ring (2) with two screws (1).
d.
Follow-on Maintenance.
(1)
Connect batteries (see para 4-114).
(2)
Start engine, place truck transmission in reverse and test operation of back-up lights.
4-285
|
