|
| |
TM 5-4210-233-14&P-1
4-46. TANK FILL AND RECIRCULATING VALVE - Continued
(4)
Remove control rod (5) and nylon washer (6).
(5)
Remove eight bolts (7).
(6)
Remove valve (8) from between flanges (9).
(7)
Remove and discard two O-rings (10).
b.
Disassembly.
(1)
Use spanner wrench to turn seal retainer (1) counterclockwise until free from valve body (2).
(2)
Remove and discard retainer and O-ring (3).
(3)
Remove and discard seat (4).
(4)
Remove and discard seat O-ring (5).
(5)
Remove capscrew (6) and handle washer (7).
(6)
Mark position of handle (8).
(7)
Remove handle (8) and handle O-ring (9). Discard O-ring (9).
(8)
Mark position of stop plates (10).
(9)
Remove two stop plates (10).
(10)
Remove pivot bolt (11) and pivot bolt O-ring (12). Discard pivot bolt O-ring (12).
(11)
Remove ball valve (13).
(12)
Remove actuator shaft (14) and O-ring (15). Discard O-ring.
4-239
|
