|
| |
TM 5-4210-233-14&P-1
4-44. #2 CROSSLAY VALVE - Continued
(10)
Install roll pin (15) and lock spring (14).
NOTE
Perform step (11) only if handle assembly was disassembled.
(11)
Install stop brackets (27) with socket head screws (26).
(12)
Install handle assembly, actuator clip (12), handle disc (11), handle washer (10) and socket head
screw (9).
e.
Installation.
(1)
Apply a thin coat of silicone grease (Item 11, Appendix E) to two new O-rings (8). Install O-rings
(8) in grooves on valve body.
(2)
Carefully pull pipe (1) towards curbside and place valve (2) between two flanges (3).
(3)
Secure valve (2) with eight bolts (4).
(4)
Position control rod (5) and nylon washer (6) on valve handle (7).
(5)
Install retaining pin (9) and new cotter pin (10).
f.
Follow-On Maintenance.
(1)
Install curbside operator's panel (see para 4-26).
(2)
Connect batteries (see para 4-114).
4-233
|
