|
| |
TM 5-4210-233-14&P-1
4-43. #1 CROSSLAY VALVE - Continued
b.
Disassembly.
(1)
Move handle (13) so valve is in open position.
(2)
Remove socket head screw (9), handle washer (10) and handle disc (11).
(3)
Mark position of actuator clip (12) and handle assembly (13) and remove.
(4)
Mark position of lock spring (14) and remove.
(5)
Mark position of roll pin (15) and remove.
(6)
Remove pivot bolt (16) and O-ring (17). Discard O-ring.
(7)
Rotate valve ball (18) out of valve body (6).
NOTE
Valve must be in open position.
(8)
Remove actuator shaft (19) and O-ring (20). Discard O-ring.
(9)
Remove seat retainer (21) by turning counterclockwise with spanner wrench.
(10)
Discard seat (23), O-ring (25), and seat retainer (21).
(11)
Remove and discard O-ring (22).
4-225
|
