|
| |
TM 5-4210-233-14&P-1
4-41. FOAM VALVE - Continued
(10)
Install handle washer (7) and capscrew (6).
e.
Installation.
(1)
Carefully pull pipe (1) towards curbside and place valve (2) with two new O-rings (10) between
two flanges (3). Apply a thin coat of silicone grease (Item 11, Appendix E) to O-rings.
(2)
Secure valve (2) with eight bolts (4).
(3)
Position control rod (5) and nylon washer (6) on valve handle (7).
(4)
Install retaining pin (8) and new cotter pin (9).
f.
Follow-on Maintenance.
(1)
Install curbside operator's pump panel (see para 4-26).
(2)
Connect batteries (see para 4-114).
4-219
|
