|
| |
TM 5-4210-233-14&P-1
4-32. METERING VALVE DRAIN - Continued
b.
Installation.
(1)
Install nut (3) and knob (2) on needle (5).
(2)
Tighten set screw (1 0).
(3)
Apply pipe sealant (Item 2, Appendix E) to fittings (9).
(4)
Install fittings (9).
(5)
Position housing in panel and install internal tooth washer (8), washer (7) and nut (6) on housing
(4).
(6)
Apply a light coat of grease (Item 17, Appendix E) to needle (5).
(7)
Install needle (5), nut (3), and knob (2) as an assembly.
(8)
Thread needle (5) into housing (4).
(9)
Tighten nut (3).
(10)
Install two hoses (1).
c.
Follow-on Maintenance.
(1)
Connect batteries (see para 4-114).
4-199
|
