|
| |
TM 5-4210-233-14&P-1
Table 4-2. Unit Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM - PUMP PANEL - Continued
11
PSI REDUCTION (PUMP DE-STROKE) VALVE DOES NOT ENGAGE WITH DIVERTER SWITCH
IN NEUTRAL POSITION AND AERIAL PANEL T-HANDLE IN "LOCK" - Continued
Step 4.
With all power off check for continuity between wires 1304 and 1305 at PSI reduction
manual diverter override relay.
Replace PSI reduction manual diverter override relay (see para 4-9.4).
Step 5.
Check for 12V across coil at PSI reduction diverter valve override relay.
If 12V is present, go on to Step 6.
If 12V is not present, go to Step 9.
Step 6.
With manual override T-handle in horizontal position, check diverter valve manual override
limit switch for open.
Replace limit switch (see para 4-9.4).
Step 7.
With diverter valve switch in neutral position, check for open between wires 1238 and 1270.
Replace switch (see para 4-179).
Step 8.
Check for open between wires 1223 and 1337 on PSI reduction diverter valve relay.
Replace relay (see para 4-9.4).
Step 9.
Check wires for continuity.
Replace wire (see para 4-9.4).
4-127
|
