|
| |
TM 5-4210-233-14&P-1
Table 4-2. Unit Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TRANSMISSION - Continued
6
NO RESPONSE TO SHIFT LEVER MOVEMENT
Step 1. Check shift linkage.
Reconnect and/or adjust as required (see para 4-100).
Step 2. Main pressure low.
Change oil and filter (see para 4-142).
7
TRUCK MOVES IN NEUTRAL
Check shift linkage adjustment.
Adjust as required (see para 4-1 00).
8
TRANSMISSION HAS HIGH STALL SPEED
Check for low oil level.
a. Add oil.
b. Notify Direct Support.
ENGINE
1
STARTER WILL NOT CRANK MAIN ENGINE
Step 1. Check all connections between battery and starter for tightness and corrosion.
Clean/tighten as required.
Step 2. Connect jumper between B and S terminal on motor.
a. If starter motor starts, fault is in ignition circuit (see Electrical troubleshooting section).
b. If starter motor will not start, Notify Direct Support.
Check ignition circuit.
4-43
|
