|
| |
TM 5-4210-233-14&P-1
5-64. FRONT EXTENSION/RETRACTION CYLINDER
This task covers:
a.
Removal
c. Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
PERSONNEL REQUIRED: 2
Tool Kit, General Mechanics, Automotive
(Appendix B, Section 111, Item 1)
EQUIPMENT CONDITION
Ladder Extended (see para 2-14.)
MATERIALSIPARTS REQUIRED
Main Engine Shutdown (see para 2-12.)
Retaining Compound (Item 7, Appendix E)
APU Shutdown (see para 2-16.)
O-ring (Figure 188, Appendix E)
a.
Removal.
WARNING
Ladder must be in horizontal position to prevent movement of
ladder when cylinder is removed.
(1)
Move ladder so that it is extended about half way and in a horizontal position at the rear of the truck.
NOTE
Obtain suitable container to catch hydraulic oil that drains from
cylinder.
(2)
Remove hydraulic line (1) from barrel end of cylinder (2).
5-360
|
