|
| |
TM 5-4210-233-14&P-1
5-59. OUTRIGGER JACK CYLINDERS - Continued
c.
Assembly.
(1)
Install new rod seal (9), new wiper seal (8), and new gland O-ring (10) on gland (3).
(2)
Apply hydraulic oil (Item 28, Appendix E) to gland (3).
(3)
Install gland (3) on rod (4).
(4)
Install new rod O-ring (12), piston (6), and nut (7) on rod (4).
(5)
Torque nut (7) to 210 ft Ibs (285 Nm).
(6)
Apply hydraulic oil (Item 28, Appendix E) to piston (6).
(7)
Install two new piston seals (11) onto piston (6).
(8)
Install piston (6), rod (4), rod lug (5) and gland (3) as an assembly in tube assembly (2).
(9)
Thread gland (3) into cylinder.
(10) Use a spanner wrench to thread gland (3) into tube assembly (2) until they are flush.
(11) Install nylon plug (13) and set screw (1). Tighten set screw so plug deforms against gland threads.
d.
Follow-on Maintenance.
(1)
Install outrigger jack cylinder (see para 4-195).
5-349
|
