Assembly-continued -706880978

TM 5-4210-233-14&P-1

5-43. FORWARD TANDEM AXLE AND DRIVE UNIT-Continued

(33)

If the bearing cones (59) were not installed on the

differential case and ring gear assembly (82),

install the cones on the differential case. Place the

case assembly (82) in a press, fit the cone

bearing (59) to the assembly and use a sleeve to

press the cone (59) in place. Cone must be

installed in contact with the shoulder on the case.

(34)

Install the cups (58) over the bearing cones on the

differential case. Use a lifting device and strap and lift

the differential case and ring gear assembly (82) up

into position on the carrier. Bearing cups (55) must

be flat and in position against the bores between the

carrier legs.

5-308