Assembly-continued -706880976

TM 5-4210-233-14&P-1

5-43. FORWARD TANDEM AXLE AND DRIVE UNIT-Continued

(25)

Install a thrust washer (63) and a side gear(65) in the flange half of the differential case opposite of

ring gear (19).

(26)

Install the four pinions (66), and thrust washers (67) on the spider (64) and install the spider (64)

and gears in case half (60).

(27)

Install the second side gear (65) and thrust washer (63). Put the plain case half (60) over the

flange half and differential gears. Rotate the case to align the matchmarks.

(28)

Install four washers (62) and screws (61) at equal positions around case half (56). Tighten the

screws to putt the case halves together. Install remaining washers (62) and screws (61). Torque

screws to a torque of 75 to 95 lb ft (100 to 130 N.m).

5-306