Disassembly-continued -706880961

TM 5-4210-233-14&P-1

5-43. FORWARD TANDEM AXLE AND DRIVE UNIT-Continued

(12)

Place the bearing cage (13) in a press supported by wooden blocks. Press the output shaft (16),

the bearing cones (17) and the outer cup (18) from the bearing cage (13).

(13)

Remove external outer cup (18) from output shaft (16). Use a press or bearing puller to remove

two bearing cones (17) from output shaft (16).

(a) Put a used or spare bearing cup on the inner bearing cone (17).

(b) Place the output shaft (16) in a press with the spare bearing cups supporting the shaft.

5-291