Assembly-continued -706880942

TM 5-4210-233-14&P-1

5-42. REAR TANDEM AXLE AND DIFFERENTIAL-Continued

(23)

Install second side gear (13) and thrust washer (10) on spider and gears. Check match marks and

install plain case half on assembly.

(24)

Apply retaining compound to holes in case half. Install four washers (8) and screws (7) into case

halves (9), with distance between fasteners being equal.

(25)

Torque the screws (7) to 85 to 115 lb ft (115 to 156 Nm). Tighten the screws (7) in a sequence

opposite each other.

(26)

Install the remaining twelve washers (8) and screws (21) in the casehalves and torque to 85 to 115

lb ft (115 to 156 Nm).

(27)

Fashion a tool for checking rotating resistance of differential gears. The tool can be made from an

axle shaft that matches the spline size of the differential side gear.

5-272