Assembly-continued -706880936

TM 5-4210-233-14&P-1

5-42. REAR TANDUM AXLE AND DIFFERENTIAL - Continued

(4)

Reverse drive pinion (1) in press to place gear end up. Press spigot bearing (35) on shaft ofgear

spigot. Bearing (35) must be flat against face of gear.

(5)

Install retaining ring (30) in groove in end of shaft to secure spigot bearing.

(6)

Apply axle lubricant to bearing cups (33 and 34) in bearing cage (28) and to bearing cones and

bearing on pinion.

(7)

Install spacer (26) of same thickness as was removed at disassembly.

(8)

Install assembled drive pinion (18) in bearing cage (28). Install outer bearing cone (32) in bearing

cage (28).

5-266