Installation -706880863

TM 5-4210-233-14&P-1

5-31. RADIATOR - Continued

(18)

Lift radiator from truck.

b. Installation.

(1) Connect a suitable lifting device to the

radiator top and carefully lower the radiator

into the truck.

(2) Install eight hex head screws (1) with lock-

washers (2) to secure radiator in place.

(3) Connect two transmission coolant hoses (3)

to bottom of radiator.

(4) Install 3-inch lower hose (4) to bottom of

radiator and tighten clamp (5).

(5)

Close radiator drain cock on bottom of radiator by turning in a clockwise direction.

(6)

Attach stabilizer brackets (6) with screws (7) and washers (8).

(7)

Put radiator stabilizer rod assembly (9) in position (with spring (10) at top). Install lock-washers (11)

and nuts (12) on bottom end stabilizer rods.

(8)

Install 3/8-inch by-pass hose (14) on radiator and tighten clamp (13).

(9)

Install 1 -inch by-pass hose (1 5) on radiator and tighten clamp (1 6).

(10) Install two 2-1/2 inch hoses (17) and tighten clamps (18).

(11) Connect two wires (19) to low water sensor (20).

5-193