Assembly-continued -706880804

TM 5-4210-233-14&P-1

5-22.

BLOWER REPAIR - Continued

(23)

Position two flat bearing retainers (14) on rear end ptate (10)

and install six screws (15) in retainers. Tighten six screws to

10 Ib-ft (14 N ).

(24)

Install two roller bearing collars (16) to both shafts (4)

at front end plate (6) with bearing installer tool.

(25)

Apply lubricating oil (Item 10, Appendix E) to two

roller bearings (17).

(26)

Install roller bearings (17), over rotor shafts (4)

with bearing installer tool.

NOTE

Flanges on bearing retainers face front end plate.

(27)

Install two flanged bearing retainers (18) with six

screws (19) on front end plate (6). Tighten screws

to 10 Ib-ft (14 N ).

5-134