|
|
TM 5-4210-233-14&P-1
Table 5-2. Direct Support Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
STEERING SYSTEM - Continued
1
STEERING HARD IN ONE OR BOTH DIRECTIONS - Continued
Step 5. Check for contamination in steering pump relief valve.
Clean or replace relief valve (see para 5-26).
2
STEERING EXTREMELY LIGHT IN ONE OR BOTH DIRECTIONS
Check steering gear reversing springs.
Replace reversing springs (see para 5-39).
3
DARTING, WANDERING (OVER)STEERING
Step 1. Check wheel alignment.
Adjust tie rod ends (see para 5-40).
Step 2. Check for looseness or worn axle steer joints.
Tighten or replace joints (see para 5-40).
Step 3. Check for worn or damaged steering gear.
Replace or repair steering gear (see para 4-161 or 5-39).
4
OIL LEAKING AT STEERING PUMP DRIVE SHAFT
Oil seal or shaft worn.
Repair or replace steering pump (see para 5-26).
5
OIL LEAKING AT OUTPUT SHAFT OF STEERING GEAR
Check quad ring seal and bronze bearings in steering gea.
r
Replace or repair steering gear (see para 4-161 and 5-39).
6
OIL LEAKING AT INPUT SHAFT OF STEERING GEAR
Check oil seals and actuating shaft.
Replace oil seals. Polish or replace actuating shaft (see para 5-39).
5-8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |