110 VAC, 60 HZ RECEPTACLES -706880500

TM 5-4210-233-14&P-1

4-117. 110 VAC, 60 HZ RECEPTACLES

This task covers:

a. Removal

b. Installation

TOOLS REQUIRED

EQUIPMENT CONDITION

Tool Kit, General Mechanics, Automotive

Main Engine Shutdown (see para 2-12.)

(Appendix B, Section III, Item 1)

APU Shutdown (see para 2-16.)

a. Removal.

NOTE

There are five receptacles, two on each side of hose

body, and one at the ladder tip.

(1) Remove screws (1), face plate (2) and face

plate gasket (3).

(2) Remove screws (4) and carefully remove

receptacle (5) from panel (6).

(3) Loosen screws (7) on back of receptacle (5) and

tag and disconnect three wires (8).

b. Installation.

(1) Connect new receptacle (5) to wires (8) as

tagged. Secure with screws (7) on back of

receptacle (5).

(2) Install receptacle (5) on panel (6) using screws

(4).

(3)

Install gasket (3) and face plate (2) on

receptacle (5) using screws (1). Make sure face

plate gasket (3) is flat and pulled tight against

panel.

(4) Start APU (see para 2-16) and test 110V

receptacles.

4-371