Installation of Outside Handle/Lock

TM 5-4210-233-14&P-1

4-71. UPPER AND LOWER COMPARTMENT DOORS-Continued

Installation of Outside Handle/Lock.

(1)

If latch (9) has been removed, install in door (1).

(2)

Secure latch (9) to door (1) with four screws (10), washers (11) and nuts (12).

NOTE

If blinder holder (4) blocks way, remove it by removing four

screws (5) and washers (6).

(3)

To install handle, apply sealant (Item 35, Appendix E) to both sides of gasket (8).

NOTE

Center handle (7) and gasket (8) on outside of door and secure

with screw (2) and flatwasher (3) from inside of door.

Replace Door Seals.

(1)

To remove damaged door seals (15), pull damaged seals from door (1).

(2)

Remove all remaining glue and damaged seal.

(3)

To install new seals, remove backing from glue strip on seals.

(4)

Align seals (15) on door and press on door (1).

4-299