Assembly -706880373

TM 5-4210-233-14&P-1

4-47. AERIAL DISCHARGE VALVE - Continued

WARNING

Death or serious injury could occur if compressed air is

directed against the skin. Do not use compressed air for

cleaning or drying unless the pressure is/has been

reduced to 30 psi (2.11 kg/cm2) or less. When working

with compressed air, always use chip guards, eye protec-

tion, and other personal protective equipment.

(2) Dry all parts with compressed air.

(3) Inspect valve body (9) and seal housing (19) for cracks. Check mounting surfaces for deep

scratches. Replace as necessary.

(4) Inspect ball (13) for grooves or cracks. Replace as necessary.

(5) Replace all parts determined to be defective.

d. Assembly.

NOTE

Whenever locking plate (30) is loosened or removed,

adjust it with a feeler gage during reassembly to provide

0.010 inch (.254 mm) clearance between plate and rack

(14) when unlocked.

4-244