STREET SIDE OPERATOR'S PANEL -706880311

TM 5-4210-233-14&P-1

4-25. STREET SIDE OPERATOR'S PANEL

This task covers:

a. Removal

c. Follow-on Maintenance

b. Installation

TOOLS REQUIRED

PERSONNEL REQUIRED: 2

Tool Kit, General Mechanics, Automotive

(Appendix B. Section III, Item 1)

EQUIPMENT CONDITION

Main Engine Shutdown (see para. 2-12.)

Shop Equipment, Automotive

APU Shutdown (see para. 2-16.)

Maintenance and Repair

Batteries Disconnected (see para. 4-114.)

(Appendix B. Section III, Item 4)

Drivers Side Auxiliary Suction Valves Remove

Discharge Connections/Chrome Adapters

Removed (see para. 4-56.)

a. Removal.

(1) Remove fourteen roll pins (1 ) and fourteen T-handles

(2) from operating rods (3).

(2) Remove roll pin (4) and remove front suction control

wheel (5) and washer (6) from shaft (7).

(3) Remove side suction cap.

(4) Remove snap ring (8) and pull plunger assembly (9)

from three drain valves (10).

(5) Remove six screws (11) from three drain valves (10).

4-182