Table 2-1. Operator PMCS Procedures-continued -706880065

TM 5-4210-233-14&P-1

Table 2-1. Operator PMCS Procedures -Continued

Item

Interval

Equipment Is Not

No. A D W

ITEM TO BE INSPECTED/Procedures

Ready/Available If:

CAB ASSEMBLY, LIGHTS AND CONTROLS -

Contlnued

Seats and Seat Belts

Check operation of all seat position levers to ensure

- Seats loose, or any seat

each seat is fully adjustable.

adjuster fails to lock.

Check operation of seat belts and check fabric is not

- Seat belts missing or

worn or torn.

severely damaged.

Check ail seat and belt fasteners are tight.

Check operation of driver's seat adjustment levers

- Seats loose, or any seat

and valve to ensure seat is fully adjustable.

controls fail to operate

properly.

Check operation of seat belts and check fabric is not

- Seat belts missing or

worn or torn.

severely damaged.

Check ail seat and belt fasteners are tight.

Windshleld Washer/Wlper

Check fluid level in wash bottle is up to the fuII mark.

Replenish as required.

Check wiper and washer controls. Wiper speed

should be fully adjustable between slow and fast

speed. Washer nozzles should spray fluid into path of

wipers. Clean nozzles as required.

2-37