|
|
TM 5-4210-233-14&P-1
Table 2-1. Operator PMCS Procedures -Continued
Item
Interval
Equipment Is Not
No. A D W
ITEM TO BE INSPECTED/Procedures
Ready/Available If:
5
HOSE BODY ASSEMBLY - Contlnued
Llghts - Contlnued
Report any failed lamps to Unit Maintenance.
Handralls
Inspect for missing attaching hardware or iooseness.
Report any loose handrail or missing attaching
hardware to Unit Maintenance.
Rear Step Platforms and Tread Plates
Inspect for visible damage or missing attaching
- Attaching hardware
hardware.
totally missing from step
plafform or tread plate.
Report visible damage or missing attaching hardware
to Unit Maintenance.
Upper and Lower Compartment Doors
Check each compartment for the following:
a.
Hatch holder holds door in open position.
b.
Lamp illuminates when switch is depressed.
c.
Door latches easily and does not open when
- Door will not latch
tugged.
securely.
d.
Door seal is intact and securely in place.
e.
Equipment is stowed correctly and fixtures are in
- Heavy equipment
place.
stowing fixtures missing or
loose.
Report any deficiencies to Unit Maintenance.
2-33
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |